One of the most important decorative elements used in the design of a wedding cortege are wedding rings on the car, which are mounted on the roof of the car or on its hood. They can be made of metal or wood, decorated with flowers or ribbons.
The choice depends on the individual preferences of the newlyweds and, of course, the style of the wedding celebration. It is the rings that become the main decoration and a kind of hallmark of the car in which the bride and groom are traveling. If for some reason it is not possible to purchase such an ornament, then young people can make such rings with their own hands and fix them on their own.
Various decorations of wedding cars make the holiday unique and attract the attention of others. Wedding rings are attached to the car in order to highlight the car of the young, and at every holiday this decoration looks special. The decoration of the wedding procession is carried out in the same style as the general decoration of the celebration, but the most popular material for decorating rings are fresh or artificial flowers and satin ribbons.
Depending on what the preferences of the young are, the following can be used as an element of decor:
If in the old days all these elements were used to attract happiness, good luck, wealth, and drive away evil spirits from the newlyweds, today decorating a wedding car has become a tradition.
Wedding rings with flowers are a traditional decoration of the car in which the bride and groom will ride.
Typically, such rings are made of metal, they are decorated on top with spray paint or wrapping paper intended for decorating bouquets, or foil.
For decoration, you will need one large flower, many smaller plants and some unopened buds. It is better to use artificial flowers, as live plants can quickly lose their original freshness.
To fix such a composition on the roof of the car, you will need to make a base, which can be used as another medium-sized ring or a metal plate. Flowers need to be tied to it - they will serve as an excellent decoration, with which you can hide from prying eyes the place of attachment and the base itself.
If satin ribbons are not used when creating a composition, then adhesive tape is required to secure not only the structure itself, but also the flowers.
In the old days, it was customary to mount decorative wedding rings on the arc of a troika carrying the newlyweds to the church.
A bell was hung from the upper edge of each ring to ward off evil spirits from the young. Later, instead of bells, various figures began to be placed inside the rings:
The figure of a swan has become an ornament that symbolizes fidelity and devotion, and such figures can be placed not only inside the rings, but also on both sides.
It is important to make sure that the birds seem to look into each other's eyes.
Decorating rings with satin or tulle ribbons requires attention and care.
They can be wrapped around the rings themselves and then used to tie the structure to the base.
Not only the outer winding is made of satin ribbons, but they are also folded, creating flowers.
With the help of ribbons, you can not only decorate, but also attach the rings to the roof of the car.
Rings on the roof or on the hood of a wedding car symbolize the eternal love of future spouses.
They seem to be intertwined and inseparable. The placement of various figures inside the rings is also symbolic, but this tradition was almost forgotten, and it was replaced by the desire to make the decoration original, unique, inimitable.
One of these ways is to place soft toys inside the rings. Most often these are two bear cubs. On the head of one of them a top hat flaunts, and the head of the other is decorated with a veil.
Such decorations do not have to be mounted on the roof, they can be placed on the hood of the car or on its front bumper.
To make rings yourself, you will need an ordinary corrugated pipe or a thin hose to decorate the newlyweds' car. This is a flexible base that easily takes any desired shape. A steel wire inserted inside the tube will help to keep it.
A wooden block inserted into the hose or an ordinary cork plug from a wine bottle will help to firmly connect the ends of the tube. It is thoroughly covered with glue (it is better to use supercement) and the ends of the hose are pulled onto the slippery part, achieving a tight connection. Having made the first ring, proceed to the manufacture of the second.
To do this, a piece of hose prepared in advance (its length is several centimeters less than the first part) is threaded into the finished ring.
Thus, the two circles intertwine and become inseparable. Now you need to repeat all the steps performed with the first product.
Before proceeding with the creation of the base for attaching the rings, the blanks are decorated with golden foil, wrapping paper or ribbon intended for decorating bouquets. The surface of the blanks is pre-lubricated with glue and proceed to the wrapping.
While the glue dries, you can start making the base on which the rings will be fixed. To do this, you can use a metal or wooden plate. So the base will be strong enough and reliable. If the process of creating rings can be simplified by using a Styrofoam template, then as far as the base is concerned, an oversight cannot be made here.
Otherwise, the entire structure may be destroyed by a gust of wind while the machine is moving.
There are several ways to attach DIY wedding car rings. The design can decorate:
Each has its own mounting method. If the rings can be simply tied to the bumper or radiator grille using satin ribbons tied into original knots, then fabric will be needed when installing them on the hood. It can be tulle, knitted under the bonnet and decorated with natural or artificial flowers.
You can fix the decorative rings on the roof of the car using special fasteners, which are used as suction cups.
They should be securely fixed to the base of the structure, and the surface to which the decoration will be attached should be thoroughly degreased.
After reviewing this video, you will learn how to make wedding rings on the car yourself:
However, this method is suitable for fixing decorative rings on the hood of a car, but it is better to tie a structure to the roof.
To do this, you will need satin ribbons or a thin cord that can be masked with a flower garland.
Today you will see the process of making jewelry for a wedding car in the form of wedding rings. You can also pick up ready-made decorations for a St. Petersburg car or use wedding dolls and toys, read about the manufacturing process of the latter.
To create rings to decorate a wedding car, you need:
flower arrangement (optional)
2 pcs. outlet hose (can be purchased at an auto parts store, about 40 rubles for a couple of pieces);
3 pcs. old finger batteries;
Golden paper ribbon (available at a flower shop);
2 pcs. wooden ruler (about 30-40 cm long);
Transparent tape.
Wedding car decoration rings step by step:
Steam the flowers over a jet of steam (above the kettle) (photo 1). When steamed, artificial flowers will look like in photo 2. Details before assembly (photo 3), and when assembled, the flower arrangement will look like in photo 4.
The outlet hoses are quite hard and hollow inside (photo 5). Insert a battery into one side of the hose. You need this to create a circle later (photo 6). Fasten into a ring (photo 7). You need to make three rings from two hoses. Make one ring from one, and two from the other (Pic 8).
Wrap the rings with gold ribbon (Pic 9). Then take two simple rulers of wood, about 30-40 cm long. Glue them together with tape and wrap with gold ribbon (Pic 11-12).
Attach two rings to the ruler (Pic 13). Secure the third ring as a base and attach the artificial flowers (Pic 14-15).
Yana Volkova May 30, 2018, 11:50The desire to decorate everything and everything on a festive day haunts many newlyweds. This day is so joyful and long-awaited for brides and grooms that they do their best to inform the world about it. Or at least to everyone you meet along the way. Such an accessory as car rings for a wedding copes well with this task. A cortege is going to the registry office or a church, and it immediately becomes clear what is inside car with rings on the roof sitting not just anyone, but the real newlyweds.
Photos of rings on a car for a wedding - decorated transport for the bride and groom
The decor of the banquet hall, registration areas, photo shoot locations are usually entrusted to professional designers to "no hitch, no hitch". This mania does not bypass the main vehicle of the future husband and wife.
Unfortunately, exclusive rings for wedding cars are not cheap, and salons offer a rather limited selection.
You will not find zest and originality at a sane price in the afternoon with fire. Difficulty, but not a problem! There is always the option to add a touch of uniqueness to regular store-bought wedding car rings. Or make them from scratch with your own hands.
When the wedding decor is not available to the bride and groom for reasons beyond their control, it is better to do it yourself, after studying the master class, without spending extra money. Of course, you have to tinker, but the result can suddenly surprise you. For work you will need: a flexible plumbing pipe, a large roll of tape, a piece of foam for the base, reliable glue, scissors, a knitting needle, satin wide ribbons (other material is also welcome), narrow ribbons for fastening (floral can be), artificial flowers, fabric and other interesting things, in depending on the idea and imagination.
Basic materials for working on wedding rings on the car
Here small step-by-step instruction for Dummies for the production of hand-made wedding symbols:
DIY photo of rings on a wedding car
For complete confidence in understanding the process, watch a short video of a master class for making wedding rings with your own hands for car decor. Another piece of good advice and a fresh idea never hurt.
In principle, making rings yourself is an idea for perfect needleworkers and fans of exclusivity. And not all materials are always at hand. But in an original way, store rings can also be supplemented, the decor of which does not differ in variety. Just keep the style of your wedding and in this accessory:
Linen ribbons for decorating rings for a country wedding
Do not be afraid to create, invent and fantasize! Everything is possible for newlyweds on their day!
It is very important to securely fasten the rings on the roof of the wedding car or on the hood. Losing an accessory from a gust of wind on the road, created by oneself, is insulting and stupid. This procedure is done in two different ways:
Method one - classic. This is how our dads and moms (and maybe even grandparents) fastened the rings.
Prepare long satin ribbons, the color of which will harmonize well with the resulting composition.
Carefully wrap them around the foam base. Then, pass the ends of the tapes under the hood cover on both sides and tie tightly at the bottom of the cover. You can use 2-3 tapes, which are fixed crosswise for reliability. So the design with the rings will not move to the side.
More rings can be mounted on the roof of the car. In this case, pass the long ends of the tapes through the windows and tie them together under the roof in the cabin.
Wedding rings on the roof of the car, secured with ribbons
The second method of fastening is modern and not so noticeable.- Neodymium magnets. They are inserted into the lower part of the foam base, and the structure is simply attached to the iron body of the car. Experts say that these magnets are strong enough to attach rings and not lose them on the road in traffic.
Wedding rings on the hood - fastening with magnets
Decorating a wedding car for the bride and groom is a fantasy task. Someone loves flower beds on the hood, someone likes balloons and ribbons more. Many people still put an elegant doll on the car, remembering the traditions of their parents. Wedding rings on a car, as a signal beacon for others, what exactly this car carries new family on such an important day for the newlyweds.
Marriage is soon? Congratulations! Don't want to spend money on decorations for your wedding car?
Not a problem, you can make them yourself, for example, wedding rings on a corrugated pipe car. It is not difficult at all and even interesting.
We offer to make a decoration for a wedding car - rings - with your own hands!
It just takes a little imagination and imagination. After all, not only guests, but also passers-by pay attention to the wedding procession.
The most important attribute in decorating a wedding car is the rings on the roof. Wedding rings are a symbol of fidelity and happiness.
We will need the following materials to make DIY wedding car rings
We take a corrugated pipe, cut it into two different parts and connect it into a ring and fasten it with tape.
So that the ring does not have a corrugated surface, we wrap it with wide adhesive tape around the entire perimeter.
We wrap our rings for the wedding car with a wide green ribbon. The color of the ribbon of the rings can be any, it all depends on your imagination or the style of your wedding.
We wrap the rings for the wedding car with colored tape
We take our prepared foam and attach our rings to it with white tape in several places so that they hold tight.
We fix our rings on a foam base
Holes in the foam can be pierced through with a knitting needle.
We cut the satin ribbon in half by 3 meters and tie it so that the foam and rings are together, as shown in the photo. The tape is needed to attach our wedding rings to the roof of the car.
We cover the foam base with a cloth and tie it with ribbons
Sew fabric down the perimeter of the foam. This is to prevent the flower roots from scratching the car.
We take our beautiful flowers (they can be of any color) and cut them to the desired length.
We attach flowers around the entire perimeter of the base so that the fabric is not visible.
We decorate our wedding car rings with flowers
The remaining flowers are evenly distributed over the entire area. We stick it into the foam and fill it with glue so that when the car moves, they do not fly out.
Every process of preparing for a wedding is important and requires carefully thought out decisions. Very often you can find a situation where the newlyweds cannot choose one or another element, despite the wide range. This can happen for two reasons, due to the fact that the proposed products do not contain the necessary elements, which, for example, should support the theme of the wedding, or the product has a high cost. But you never need to despair and give up, because you can always find a way out of this situation. If you can’t find wedding rings for a car, you can make them yourself with your own hands, while such an ornament will have many advantages.
If there is a desire, but there is a fear that it will not work out, you should not worry, because this is a fairly simple job that does not require special skills. In addition, the decoration can always be altered or modified, the only thing you need is to prepare well and think through everything to the smallest detail.
You can see examples in the photo, which will help you make a choice. As well as a video that will tell you in detail about all the moments in the process of work.
